What people rent these meters for
Twelve applications where a clamp-on measurement is faster, cheaper or simply the only option. All of them share the same requirement: clean liquid, full pipe, under 80 °C, and enough straight run.
- Fire pump flow testingAnnual NFPA 25 tests without hose streams or a flow loop
- Chilled water balancingVerify design GPM at coils, risers and branches
- Pump flow verificationPlot the real operating point against the pump curve
- HVAC test and balanceIndependent flow numbers to arbitrate circuit setter readings
- Energy audits and BTUFlow and delta-T together for measurement and verification
- Cooling tower makeupCycles of concentration and sewer evaporation credit
- Data center coolingCDU and chilled water loops with no maintenance window
- Water loss auditingTemporary district metering on transmission mains
- Leak detectionNight flow analysis and line balance on networks
- District coolingCampus loop verification and thermal billing checks
- Billing meter verificationIndependent check on a utility, tenant or process meter
- Temporary network meteringProve a measurement point before you install a permanent meter